FLOYD COUNTY IN VIEW®
MAIN PAGE COMMUNITY CENTER ARTS
AND 
FEATURES
TOOLS, TOPICS AND TREATS MAIN PAGE #2


BACK TO THE LAND'S  

Ways to Survival or Self Efficiency

HOMESTEADER'S NOTEBOOK©®
Back to the Land Tips, Guidance, Info & Philosophy
FOR RURAL/SUBURBAN/URBAN HOME AND FARM
Homesteader's Personal Experiences

 

*Reader Submitted Info & Experiences:

Low Cost & Easy Greenhouse

For the Homestead

Submitted By J. Myer, jr.


Introduction
A little over two years ago my wife and I decided to try erecting our own greenhouse to extend our growing season. We didn't have enough money to have someone else do it and we couldn't afford a more elaborate one, so after visiting a friend's farm in Floyd and seeing what they had accomplished using these materials, we decided to undertake the process ourselves and were astounded at really how simple and cost effective this project was.
One more thing, neither of us have much more experience in construction or carpentry than for the most simple of projects.

Material List (for 28 foot by 15 foot greenhouse)

  • 5 20 foot pieces of 5/8 inch rebar (cut in 1/3's to about 6 foot lengths)
  • 7 20 foot lengths of schedule 40 PVC with a small (3/16-¼ inch) hole drilled dead center, at 10 feet
  • 2 20 foot lengths of schedule 40 PVC (cut into 20 inch pieces)
  • 84 feet of ½ schedule 40 PVC cut into 4 foot lengths.
  • About 80 of 2X4 treated wood
  • 4 teated 8 foot fence posts
  • 40X24 feet of UV stabilized polyethylene
  • 60 2 ½ inch fence staples

pound in your 6 foot long pieces of rebar every 4 feet, Slide the 20 inch pieces of PVC over the rebar stakesNail on 2X6 runner to the rebar stakes1. Start by stretching a string along where you want the two long sides of the greenhouse to be. Then pound in your 6 foot long pieces of rebar every 4 feet in a straight line leaving 48 inches protruding from the ground. It is important that they be vertical and within ½ inch of the 48 inch target.

2. Nail on 2X6 runner to the rebar stakes. This will give you something to nail the polyethylene onto later. You can use 60 2 ½ inch fence staples. (In the picture left we put the PVC on before attaching the 2X6. This was a pain as you had to hold up the PVC while you nailed the rebar.)

3. Slide the 20 inch pieces of PVC over the rebar stakes.

* make sure no sharps are exposed: wire ends, rebar, rough pipe, etc. It will latter tear the plastic.

4. Place the 20 foot pieces of PVC on the rebar stakes. (Don't put it all the way down on one side and then do the other. Have friend do one side while you do the other, both a little at a time.

Place the 20 foot pieces of PVC on the rebar stakes

*When you first slide the pipes on, the holes you drilled MUST be horizontal (parallel to the ground). Wait about an hour and you will not be about to twist the pipe to correct the problem. The vertical rebar will bend inward as the PVC flexes. This grabs the rebar and locks up the PVC .




wire the four foot lengths of PVC pipe with copper or baling wire5. Now you can slide the wire through the holes in the PVC and then through the eight four foot pieces of PVC along the roof

pull the wire through a four foot piece of pvc,then through the holes you drilled in the pvc, wrap it around this pvc so the green house can't shift and then through the next 4 ft piece of pvc.6. To keep the ribs of this greenhouse from shifting horizontally wire the four foot lengths of PVC pipe with copper or baling wire. Make sure you wrap the wire so the PVC is forced inward not outward.

tie the wire tight on the last piece of pvc* This side wall and top tie is VERY,VERY important. If the walls can separate snow or even hail will collapse the structure. The greenhouse will stand up to about a foot (2 foot?) of snow with the ties, two inches without them. If the frame stays together the snow will slide off, if the structure pulls apart the snow can build up to a weight of a 1956 Buick. This greenhouse will not support a Buick on it.

build the two end walls with doors and slide the plastic over your rib cage7. Finally you need to build the two end walls with doors. You should put a door on both sides as it will vent better. Either use 10 foot vertical posts (4X4) buried 3-4 feet for doorway frame or 8 foot posts with bracing back to runners(as shown). The two end walls have to be well built and cannot be floppy. They have to stay vertical so the pvc cannot separate. The door needs to be tight enough so that gusts of wind cannot inflate your greenhouse.



picture of a post with nailsDrive a few nails horizontally into the base of the posts and bury them. This will help give your posts some grip in the ground. Strong winds love to hit our greenhouses(we now have two of these built). 40 MPH winds coming in from both sides test your construction. 

8. Last of all have someone help you, one person on each side, slide the plastic over your rib cage. Attach each end by rapping the end of your plastic around pieces of lath and then nail the lath to the triangular end walls and to that long 2X6 along the bottom.

Ta Da! A green house! You can make it look a lot classier. Ours is just functional.

Ok, the only problem we seem to have found is that the PVC pipe volatizes something that deteriates the polyethylene. After a summer there seems to be no problem. So, I suggust you use cheap plastic for the first season, or leave the pipes with no polyethylene for a year.



Submitted By J. Myers, jr. Photos by Martie Myers.

Jim and his wife, Martie, live and grow organic vegetables on their homestead in Franklin County.


back to top

return to back to the land page




Floyd County In View's "Back to the Land" Series
©floydcountyinview.com

  

Questions or Comments? floydcountyinview@yahoo.com
 


Disclaimer Note: Reader contributed articles are published here as submitted and as entertainment information and FCIV does not pay for any submitted material.

Floyd County In View publishes pertinent reader contributed content
if the content appears to be interesting without verifying the veracity of the content or viability of the information .

Floyd County In View  accepts no responsibilty in confirming either the information submitted nor in the sources of the contributed content.

If attempting any suggestions offered in these accounts you do so at your own risk.

Back to Previous Page ButtonReturn To Previous Page
 

Back to top

Back to Main Page


 


 

Copyright © 2000-2008 floydcountyinview.com




Back to Previous Page ButtonReturn To Previous Page
 

Back to top

Back to Main Page

TO CONTACT US: Floyd County In View


Published by CountryView Studios Publishing Co.- Floyd,Va.24091

All rights, trademarks, copyrights reserved 

Copyright ©  floydcountyinview.com - no part of this on line publication may be reproduced, printed, reprinted, downloaded, copied or reproduced digitally or electronically in any form without the express consent of the publisher and/or authors/writers/photographers.
FAIR USE NOTICE:
This site may, at times, contain copyrighted material the use of which has not always been specifically authorized by the copyright owner. We are making such material available in our efforts to advance understanding of environmental, political, human rights, economic, democracy, scientific, and social, and social justice issues, etc. We believe this constitutes a 'fair use' of any such copyrighted material as provided for in section 107 of the US Copyright Law. In accordance with Title 17 U.S.C. Section 107, any included information is for research and educational purposes. For more information go to: http://www.law.cornell.edu/uscode/17/107.shtml. If you wish to use copyrighted material from this site for purposes of your own that go beyond 'fair use', you must obtain permission from the copyright owner.

Homesteader's Notes Copyright © & 2007-Onward - floydcountyinview.com - ALL RIGHTS RESERVED.

Floyd County In View

Go Here For Details COPYRIGHT© / 2000-2006- floydcountyinview.com- ALL RIGHTS RESERVED